Troubleshooting Intermittent Scanning Issues

Hey there, cleaning techies! 🧹🛠️ If your robot's intermittent scanning feature isn't working as it should, let's troubleshoot this together:

1. Switch Check 🔍

   • First up, make sure that little switch for "breakpoint continue scanning" is flipped to the "on" position. It's like the robot's pause button – we want to make sure it's ready to pick up where it left off!

2. Mode Matters 🕒

   • Remember, the breakpoint scanning feature is a team player and only works in automatic mode. If your robot is in Do Not Disturb mode, it won't trigger breakpoint scanning. So, let's make sure it's in the right mode to play nice.

3. Fault Finding ⚠️

   • If your robot is beeping with a fault alarm while it's charging, that could be the culprit. A故障 (gu4 zhang4, which means "fault" in Chinese) can stop the breakpoint feature from working. If there's a fault, your robot won't be able to continue scanning from where it left off.

4. Restart Riddle 🔄

   • Lastly, if your robot has been restarted or reset after triggering breakpoint scanning, that could also affect its ability to continue scanning. It's like hitting the reset button on a game – you lose your progress.

🌟 Welcome to the DreameTech family, where we're committed to making your cleaning experience as seamless and efficient as possible. Let's get that intermittent scanning back on track! 🌐🤗🧼